Nema 14 High Torque Stepper Motor 14HS13-0804S 1.8 deg 18Ncm 5.74V 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 14 High Torque Stepper Motor 14HS13-0804S 1.8 deg 18Ncm 5.74V 4 Wires
This bipolar Nema 14 stepper motor with step angle 1.8deg and size 35x35x34mm. It has 4 wires, each phase draws 0.8A at 5.4V, with holding torque 18Ncm (25.5oz.in).
Electrical Specification
- Manufacturer Part Number: 14HS13-0804S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 18Ncm(25.5oz.in)
- Rated Current/phase: 0.8A
- Voltage: 5.4V
- Phase Resistance: 6.8ohms
- Inductance : 10mH ± 20%(1KHz)
Physical Specification
- Frame Size: 35 x 35mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 16.5mm
- Number of Leads: 4
- Lead Length: 400mm
- Weight: 190g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 18 |
Holding Torque (oz.in) | 25.5 |
Inductance(mH) | 10 |
Phase Resistance(ohm) | 6.8 |
Rated Current (A) | 0.8 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 34 |
Frame Size(mm) | 35x35 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 400 |
Weight(g) | 170 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.