Special Stepper Motor
Manufacturer Part Number: TQE39C-05. Motor Type: Bipolar multilayer motor. Number of Phase:2. Step Angle: 1.8 deg. Insulation Resistance:100MΩmin. (500V DC). Holding Torque: 200mN.m. Detent torque:20mN.m. Rated Current/phase: 0.4A. Rated Voltage: 12VDC. R
Buy It Now:
£20.08
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.26Nm (178.4oz.in).
Buy It Now:
£16.49
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 18Ncm (25.5oz.in).
Buy It Now:
£8.40
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm (65.1oz.in).
Buy It Now:
£14.43
This bipolar pancake Nema 11 stepper motor with step angle 1.8deg and size 28x28x9.5 mm. It has 4 wires, each phase draws 0.5 A, with holding torque 10 Ncm (14.164 oz.in).
Buy It Now:
£21.64
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in). Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good i
Buy It Now:
£11.87
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm (92oz.in).
Buy It Now:
£15.45
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in).
Buy It Now:
£23.38
This is one of the most popular stepper motor in Nema 17 size, it with 1.8deg step and size 42x42x40mm, It has 4 wires with 1m cable and 2.54mm pitch connector, each phase draws 2.0A, with holding torque 45Ncm (64oz.in).
Buy It Now:
£10.25
This is the shortest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x20mm. It has 4 wires, each phase draws current 1.0A, with holding torque 13Ncm (18.4oz.in).
Buy It Now:
£9.27
This is the strongest Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x114mm. It has 4 wires, each phase draws 4.2A, with holding torque 3.0Nm (425oz.in).
Buy It Now:
£31.34
This nema 23 stepper motor with step angle 1.8deg and size 57x57x84mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) w
Buy It Now:
£25.77
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x56mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.26Nm (178.4oz.in).
Buy It Now:
£16.49
This is the strongest nema 24 stepper motor, it with step angle 1.8deg and size 60x60x100mm. It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. A rear shaft can mount
Buy It Now:
£30.91
It has 8 wires, which have three connection options: Unipolar or Bipolar(Serial) or Bipolar(Parallel), you can choose any type as you wish. It's houlding torque reach 2.0Nm(283oz.in) with unipolar connection and 2.83Nm(400oz.in) with bipolar connection.
Buy It Now:
£25.78
This round hybrid bipolar Nema 14 stepper motor with step angle 0.9deg and size Φ36x12mm. It has 4 wires, each phase draws 0.5A at 8.5V, with holding torque 5Ncm (7.08oz.in).
Buy It Now:
£15.73