Nema 17 High Torque Stepper Motor 17HS24-2104S 1.8 deg 65Ncm 3.36V 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 17 High Torque Stepper Motor 17HS24-2104S 1.8 deg 65Ncm 3.36V 4 Wires
This is the strongest bipolar Nema 17 stepper motor we have, it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2.1A, with holding torque up to 65Ncm (92oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS24-2104S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 65Ncm(92oz.in)
- Rated Current/phase: 2.1A
- Voltage: 3.36V
- Phase Resistance: 1.6ohms
- Inductance: 3mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 60mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 500g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 65 |
Holding Torque (oz.in) | 92 |
Inductance(mH) | 3 |
Phase Resistance(ohm) | 1.6 |
Rated Current (A) | 2.1 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 60 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 500 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.