Nema 17 Stepper Motor 17HS10-0704S 2.9V 1.8 deg 18Ncm 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 17 Stepper Motor 17HS10-0704S 2.9V 1.8 deg 18Ncm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x25mm. It has 4 wires, each phase draws current 0.7A, with holding torque 18Ncm (25.5oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS10-0704S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 18Ncm(25.5oz.in)
- Rated Current/phase: 0.7A
- Voltage: 2.9V
- Phase Resistance: 4.2ohms
- Inductance : 5.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 25mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 180g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 18 |
Holding Torque (oz.in) | 25.5 |
Inductance(mH) | 5.5 |
Phase Resistance(ohm) | 4.2 |
Rated Current (A) | 0.7 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 25 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 180 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.