Nema 34 Dual Shaft Stepper Motor 34HS26-2006D 1.8 deg 4.4V 2.2Nm 6 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 34 Dual Shaft Stepper Motor 34HS26-2006D 1.8 deg 4.4V 2.2Nm 6 Wires
This unipolar Nema 34 stepper motor with step angle 1.8deg and size 86x86x66mm. It has 6 wires, each phase draws 2.0A, with holding torque 2.2Ncm (312oz.in). A rear shaft can mount encoder, hand wheel or equals.
Electrical Specification
- Manufacturer Part Number: 34HS26-2006D
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 2.2Nm(312oz.in)
- Rated Current/phase: 2.0A
- Voltage: 4.4V
- Phase Resistance: 2.2ohms
- Inductance: 7.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 66mm
- Shaft Diameter: Φ14mm
- Front Shaft Length: 37mm
- D-cut Length: 25mm
- Rear Shaft Length: 34mm
- Number of Leads: 6
- Lead Length: 300mm
- Weight: 1.7kg
Connection
A+
|
O+
|
A-
|
B+
|
O-
|
B-
|
BLK
|
YEL
|
GRN
|
RED
|
WHT
|
BLU
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Unipolar |
Holding Torque (Ncm) | 220 |
Holding Torque (oz.in) | 312 |
Inductance(mH) | 7 |
Phase Resistance(ohm) | 2.2 |
Rated Current (A) | 2 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 66 |
Frame Size(mm) | 86x86 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 14 |
Shaft Length(mm) | 37 |
No. of Lead | 6 |
Lead Length(mm) | 300 |
Weight(g) | 1700 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.