NEMA 34 Non-Captive Acme Linear Actuator Stepper Motor 34N30S5504GK5-300RS Lead 2.54mm Lead Length 300mm
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
NEMA 34 Non-Captive Acme Linear Actuator Stepper Motor 34N30S5504GK5-300RS Lead 2.54mm Lead Length 300mm
This model is a Nema 34 Non-Captive screw linear stepper motor with a 76mm body length, 1.8 degree step angle and 5.5A rated current. It is integrated with a Φ15.875mm(0.625") diameter, 300mm(11.811") lead screw length and a POM screw nut, the linear travel is 2.54mm(0.1") per revolution. It has the characteristics of high performance, long life, low noise and high efficiency.
Electrical Specification
Manufacturer Part Number: 34N30S5504GK5-300RS
Motor Type: Non-Captive
Step Angle: 1.8°
Holding Torque: 4.5Nm(637.38oz.in)
Rated Current/phase: 5.5A
Phase Resistance: 0.5ohms
Inductance: 4.5mH±20%(1KHz)
Physical Specification
Frame Size: 76 x 76mm
Body Length: 76mm
Lead Screw Length: 300mm(11.811")
Lead Screw Diameter: Φ15.875mm(0.625")
Lead/Step: 0.0127mm(0.0005")
Lead Travel/Revolution: 2.54mm(0.1")
Number of Leads: 4
Number of Thread Starts: 2
Lead Length: 500mm
Connection
A+ | A- | B+ | B- |
Red | Red/White | Green | Green/White |
Lead Screw End Machining
Anti-Backlash Nut
SKYSMOTOR provides anti-backlash nut for external lead screw linear actuator (except Size 34) and non-captive lead screw linear actuator (except size 24 and 34).
There should be a nominal backlash between lead screw and SKYSMOTOR standard plastic nut after millions of cycles. SKYSMOTOR guarantees few millions of cycles but physical backlash can be increased. To reduce or eliminate backlash, SKYSMOTOR provides spring pressure structure of anti-backlash nut.
Encoders
According to application requirements, customer can easily choose encoders via index output or non-index type and thru output method as single ended or differential output.
Also various resolution can be chosen freely for easier and precise positioning.
All SKYSMOTOR standard encoders are optical and incremental. When you choose encoder, please carefully look into options especially size, resolution, index and output method.
Brakes
Especially Vertical applications or holding motors from sudden power-off status, SKYSMOTOR standard power-off brakes for NEMA14, 17, 23, 24 and 34 sizes will be helpful to reduce concern of customers.
Wiring, Cabling and Connectors
Flying wire leads or connectors
Twisting wire leads
Heat shrink or expandable tubing
Cable housings
Teflon Coated Screw
If customer's applications require greaseless screw and nut combination, SKYSMOTOR offers teflon coated lead screw of stepper linear actuator.
Teflon coated lead screw stepper linear actuator enables it's longer life cycle and better thrust force generation against conventional SUS lead screw.
Teflon coating can be applied in the whole range of lead screw options in SKYSMOTOR and all types of linear actuators such as External, Non-Captive, and Captive.
In addition, Anti-backlash nut also can be combined with teflon coated screw too.
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Inductance(mH) | 4.5 |
Phase Resistance(ohm) | 0.5 |
Rated Current (A) | 5.5 |
Step Angle(deg.) | 1.8 |
Linear Motor Type | Non-Captive |
Physical Specification | |
Body Length(mm) | 76 |
Frame Size(mm) | Nema 34 (76 x 76) |
Lead Length(mm) | 500 |
Lead Screw Diameter(mm) | 15.875 |
Lead Screw Length(mm) | 250 |
No. of Lead | 4 |
Lead Travel/Revolution(mm) | 2.54 |
Lead Travel/Step(mm) | 0.0127 |
IP Rating | 40 |