Nema 11 Closed Loop Stepper Motor 11HS18-0674D-E1000 0.1Nm with Encoder 1000CPR
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 11 Closed Loop Stepper Motor 11HS18-0674D-E1000 0.1Nm with Encoder 1000CPR
Electrical Specification
- Manufacturer Part Number: 11HS18-0674D-E1000
- Number of phase: 2
- Step Angle: 1.8 deg
- Holding Torque: 0.1 Nm(14.16oz.in)
- Rated Current/phase: 0.67 A
- Phase Resistance: 6.8 ohms± 10%
- Inductance: 6.0 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 28 x 28 mm
- Body Length: 44.5 mm
- Shaft Diameter: Φ5 mm
- Shaft Length: 20 mm
- D-cut Shaft Length: 15 mm
- Lead Length: 300 mm
- Weight: 0.14 kg
Encoder Specification
- Driving Voltage : 5V
- Output current : 20mA
- Resolution : 1000cpr
- Output Signal : 2 Channels
- Bore Diameter : Φ5mm
- Output Frequency : ≤60MHz
- Running Speed : ≤3600rpm
- IP Protection : IP20
Connection
A+
|
A-
|
B+
|
B-
|
BLK
|
GRN
|
RED
|
BLU
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 10 |
Holding Torque (oz.in) | 14.16 |
Inductance(mH) | 6 |
Phase Resistance(ohm) | 6.8 |
Rated Current (A) | 0.67 |
Step Angle(°) | 1.8 |
Encoder Specification | |
IP Protection | IP20 |
Output Current(mA) | 20 |
Output Frequency | ≤60MHz |
Output Signal Channels | 2 |
Rated Voltage(V) | 5 |
Running Speed(rpm) | ≤3600rpm |
Physical Specification | |
Lead Length(mm) | 300 |
No. of Lead | 4 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |