Nema 11 Closed Loop Stepper Motor 11HS20-0674D-E22-300 12Ncm Encoder 300CPR
- Manuals and Documentation: Motor Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 11 Closed Loop Stepper Motor 11HS20-0674D-E22-300 12Ncm Encoder 300CPR
Motor Specification
- Manufacturer Part Number: 11HS20-0674D-E22-300
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.12Nm(16.997oz.in)
- Rated Current/phase: 0.67A
- Voltage: 6.20V
- Phase Resistance: 9.20ohms
- Inductance: 5.70mH ± 20%(1KHz)
- Frame Size: 28 x 28mm
- Motor Length: 51mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- D-Cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
Encoder Specification
- Driving Voltage : 5VDC
- Output current : ≤20mA
- Resolution : 300cpr
- Output Signal : 2 Channels
- Shaft Diameter : Φ5mm
- Output Frequency : ≤30KHz
- Output Low Voltage: ≤0.3VDC
- Output High Voltage: ≥3.4VDC
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Motor Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 12 |
Holding Torque (oz.in) | 16.997 |
Inductance(mH) | 6.5 |
Lead Length(mm) | 500 |
Motor Nema Size | Nema 11 |
No. of Lead | 4 |
Phase Resistance(ohm) | 12 |
Rated Current (A) | 0.67 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
Step Angle(°) | 1.8 |
Encoder Specification | |
Output Current(mA) | 20 |
Output Frequency | ≤30KHz |
Output Signal Channels | 2 |
Rated Voltage(V) | 5 |
Resolution(CPR) | 300 |