Nema 11 Dual Shaft Geared Stepper Motor (Hollow Rear Shaft) with 5:1 Planetary Gearbox
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 11 Dual Shaft Geared Stepper Motor (Hollow Rear Shaft) with 5:1 Planetary Gearbox
This Nema 11 stepper motor with 0.67A rated current, integrated a planetary gearbox of 5.18:1 gear ratio.
Electrical Specification
- Manufacturer Part Number: 11HS12-0674D2-PG5
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 7Ncm(9.91oz.in)
- Rated Current/phase: 0.67A
- Phase Resistance: 5.6ohms
- Inductance: 4.2mH ± 20%(1KHz)
Gearbox Specifications
- Gearbox Type: Planetary
- Gear Ratio: 5.18:1
- Efficiency: 90%
- Backlash at No-load: <=1deg
- Max.Permissible Torque: 2N.m(283oz.in)
- Moment Permissible Torque: 4N.m(566oz.in)
- Shaft Maximum Axial Load: 5N
- Shaft Maximum Radial Load: 25N
Physical Specification
- Frame Size: 28 x 28mm
- Gearbox Length: 27mm
- Front Shaft Diameter: Φ6mm
- Front Shaft Length: 18mm
- Front D-cut Length: 12mm
- Rear Shaft Diameter: Φ4mm
- Rear Shaft Length: 12mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 200g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Inductance(mH) | 4 |
Phase Resistance(ohm) | 5.6 |
Rated Current (A) | 0.67 |
Gearbox Specification | |
Efficiency | 90% |
Gear Ratio | 5.18:1 |
Gearbox Length(mm) | 27.2 |
Gearbox Type | Planetary |
Backlash at No-load(Max.°) | 1 |
Max. Permissible Torque(Ncm) | 200 |
Max. Permissible Torque(oz.in) | 283.2 |
Moment Permissible Torque(Ncm) | 400 |
Moment Permissible Torque(oz.in) | 566.4 |
Shaft Maximum Axial Load(N) | 5 |
Shaft Maximum Radial Load(N) | 25 |
Motor Specification | |
Holding Torque w/o Gearbox(Ncm) | 7 |
Holding Torque w/o Gearbox(oz.in) | 9.9 |
Motor Length(mm) | 32 |
Motor Nema Size | Nema 11 |
Physical Specification | |
Lead Length(mm) | 500 |
No. of Lead | 4 |
Shaft Diameter(mm) | 6 |
Shaft Length(mm) | 18 |
Shaft Type | D-Cut |
Single Shaft/Dual Shaft | Dual Shaft |
Weight(g) | 200 |