Nema 11 Dual Shaft Stepper Motor 11HS20-0674D 1.8deg 12Ncm 6.2V 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 11 Dual Shaft Stepper Motor 11HS20-0674D 1.8deg 12Ncm 6.2V 4 Wires
This model is dual shaft Nema 11 Bipolar stepper motor,it with step angle 1.8deg and size 28x28x51mm. It has 4 wires, each phase draws 0.67A at 6.2V, with holding torque 12Ncm (17.04oz.in).
Electrical Specification
- Manufacturer Part Number: 11HS20-0674D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 12Ncm(17.04oz.in)
- Rated Current/phase: 0.67A
- Voltage: 6.2V
- Phase Resistance: 9.2ohms
- Inductance: 5.7mH ± 20%(1KHz)
Physical Specification
- Frame Size: 28 x 28mm
- Body Length: 51mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 20mm
- Rear Shaft Length:12mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 110g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 12 |
Holding Torque (oz.in) | 17.00 |
Inductance(mH) | 5.7 |
Phase Resistance(ohm) | 9.2 |
Rated Current (A) | 0.67 |
Physical Specification | |
Body Length(mm) | 51 |
Frame Size(mm) | 28x28 |
Lead Length(mm) | 500 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
Shaft Type | D-Cut |
Single Shaft/Dual Shaft | Dual Shaft |
Weight(g) | 200 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.