Nema 17 High Temp Resistant Stepper Motors 17HS19-2004S1-H 59Ncm Insulation Class H 180℃(out of stock)
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 17 High Temp Resistant Stepper Motors 17HS19-2004S1-H 59Ncm Insulation Class H 180℃
This motor is desighed for high temperature application. We have customed motor's winding, bearing, magnetic steel and also the plastic skeleton to achivel insulation class of H, the teprature reach up to 180C degree. This motor is widely used in 3D Printer.
Electrical Specification
Manufacturer Part Number: 17HS19-2004S1-H
Motor Type: Bipolar Stepper
Step Angle: 1.8deg
Holding Torque: 59Ncm(83.6oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.5ohms
Inductance: 3.0mH ± 20%(1KHz)
Insulation Class: H 180C(356F)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 48mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 15mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 350g
Connection
A+ | A- | B+ | B- |
GRY | BRN | ORG | YEL |
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 59 |
Holding Torque (oz.in) | 83.6 |
Inductance(mH) | 3 |
Phase Resistance(ohm) | 1.5 |
Rated Current (A) | 2 |
Step Angle(deg.) | 1.8 |
Insulation Class | H 180C(356F) |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | Nema 17 (42 x 42) |
Lead Length(mm) | 1000 |
No. of Lead | 4 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
Single Shaft/Dual Shaft | Single Shaft |
Weight(g) | 350 |
Product Type | HYBRID STEPPER MOTOR |
Output Shaft Type | D-Cut |
IP Rating | 40 |