Nema 17 Stepper Motor 17HS15-0406S 12V 1.8 deg 26Ncm 6 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 17 Stepper Motor 17HS15-0406S 12V 1.8 deg 26Ncm 6 Wires
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 0.4A at 12V, with holding torque 26Ncm (37oz.in).
Electrical Specification
- Manufacturer Part Number: 17HS15-0406S
- Motor Type: Unipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 26Ncm(37oz.in)
- Rated Current/phase: 0.4A
- Voltage: 12V
- Phase Resistance: 30.0ohms
- Inductance: 30mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 39mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 290g
Connection
A+
|
O+
|
A-
|
B+
|
O-
|
B-
|
BLK
|
YEL
|
GRN
|
RED
|
WHT
|
BLU
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Unipolar |
Holding Torque (Ncm) | 26 |
Holding Torque (oz.in) | 37 |
Inductance(mH) | 30 |
Phase Resistance(ohm) | 30 |
Rated Current (A) | 0.4 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 39 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 6 |
Lead Length(mm) | 500 |
Weight(g) | 280 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.