Nema 23 Dual Shaft Stepper Motor 23HS16-2804D 2V 1.8 deg 0.55Nm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 23 Dual Shaft Stepper Motor 23HS16-2804D 2V 1.8 deg 0.55Nm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x41mm. It has 4 wires, each phase draws 2.8A, with holding torque 0.55Nm (78oz.in), a rear shaft is made for encoder or equals.
Electrical Specification
- Manufacturer Part Number: 23HS16-2804D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.55Nm(78oz.in)
- Rated Current/phase: 2.8A
- Voltage: 2V
- Phase Resistance: 0.7ohms
- Inductance: 1.4mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 41mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 19.05mm
- D-cut Length: 15mm
- Rear Shaft Length : 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 470g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 55 |
Holding Torque (oz.in) | 78 |
Inductance(mH) | 1.4 |
Phase Resistance(ohm) | 0.7 |
Rated Current (A) | 2.8 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 41 |
Frame Size(mm) | 57x57 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 6.35 |
Shaft Length(mm) | 19.05 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 500 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.