Nema 23 Stepper Motor 23HS20-2004S 3.6V 1.8 deg 0.9 Nm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 23 Stepper Motor 23HS20-2004S 3.6V 1.8 deg 0.9 Nm 4 Wires
This bipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x52mm. It has 4 wires, each phase draws 2.0A, with holding torque 0.9Nm (127.5oz.in).
Electrical Specification
- Manufacturer Part Number: 23HS20-2004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.9Nm(127.5oz.in)
- Rated Current/phase: 2.0A
- Voltage: 3.6V
- Phase Resistance: 1.8ohms
- Inductance: 5.0mH ± 20%(1KHz)
Physical Specification
- Frame Size: 57 x 57mm
- Body Length: 52mm
- Shaft Diameter: Φ6.35mm
- Shaft Length: 21mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 0.65kg
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 90 |
Holding Torque (oz.in) | 127.5 |
Inductance(mH) | 5 |
Phase Resistance(ohm) | 1.8 |
Rated Current (A) | 2 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 52 |
Frame Size(mm) | 57x57 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 6.35 |
Shaft Length(mm) | 21 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 650 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.