Nema 34 Stepper Motor 34HP44-6004S 1.8deg 8.2Nm 6.0A 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curve:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 34 Stepper Motor 34HP44-6004S 1.8deg 8.2Nm 6.0A 4 Wires
Electrical Specification
- Manufacturer Part Number: 34HP44-6004S
- Number Of Phase: 2
- Step Angle: 1.8 deg
- Holding Torque: 8.2 Nm(1161.45oz.in)
- Rated Current/phase: 6.0 A
- Phase Resistance: 0.55 ohms± 10%
- Inductance: 5.0 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86 mm
- Body Length: 112.3 mm
- Shaft Diameter: Φ14 mm
- Shaft Length: 37 mm
- Keyway Shaft Length: 25 mm
- Number of Leads: 4
- Lead Length: 500 mm
- Weight: 3.7 kg
Connection
A+
|
A-
|
B+
|
B-
|
BLK
|
GRN
|
RED
|
BLU
|
Electrical Specification | |
---|---|
Holding Torque (Ncm) | 820 |
Holding Torque (oz.in) | 1161.45 |
Inductance(mH) | 5.0 |
Phase Resistance(ohm) | 0.55 |
Rated Current (A) | 6.0 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 112.3 |
Frame Size(mm) | 86 x 86 |
Lead Length(mm) | 500 |
Shaft Diameter(mm) | 14 |
Shaft Length(mm) | 37 |
Shaft Type | Keyway |
Single Shaft/Dual Shaft | Single Shaft |
Weight(g) | 3700 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.