Nema 34 Stepper Motor 34HS31-5504S 4.5Nm Key Way Shaft 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 34 Stepper Motor 34HS31-5504S 4.5Nm Key Way Shaft 4 Wires
This Nema 34 cnc stepper motor with size 86x86x80mm. It has 4 wires, each phase draws 5.5A, with holding torque 4.5Nm (637oz.in).
Electrical Specification
- Manufacturer Part Number: 34HS31-5504S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 4.5Nm(637oz.in)
- Rated Current/phase: 5.5A
- Voltage: 2.2V
- Phase Resistance: 0.4ohms
- Inductance: 3.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 86 x 86mm
- Body Length: 80mm
- Shaft Diameter: Φ14mm
- Shaft Length: 35mm
- Key Way Length: 25mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 2.3kg
Connection
A+
|
A-
|
B+
|
B-
|
Red
|
Green
|
Yellow
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 450 |
Holding Torque (oz.in) | 637 |
Inductance(mH) | 3.5 |
Phase Resistance(ohm) | 0.4 |
Rated Current (A) | 5.5 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 80 |
Frame Size(mm) | 86x86 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | Key-Way |
Shaft Diameter(mm) | 14 |
Shaft Length(mm) | 35 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 2300 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.