Nema 42 Stepper Motor 42HS59-6004S 4.8V 1.8 deg 22Nm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 42 Stepper Motor 42HS59-6004S 4.8V 1.8 deg 22Nm 4 Wires
This Nema 42 cnc stepper motor with size 110x110x150mm. It has 4 wires, each phase draws 6A, with holding torque 22Nm (3115oz.in).
Electrical Specification
- Manufacturer Part Number: 42HS59-6004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 22Nm(3115oz.in)
- Rated Current/phase: 6.0A
- Voltage: 4.8V
- Phase Resistance: 0.8ohms
- Inductance: 14mH ± 20%(1KHz)
Physical Specification
- Frame Size: 110 x 110mm
- Body Length: 150mm
- Shaft Diameter: Φ19mm
- Shaft Length: 55.37mm
- Key Way Length: 35mm
- Number of Leads: 4
- Lead Length: 500mm
- Weight: 10.9kg
Connection
A+
|
A-
|
B+
|
B-
|
Red
|
Green
|
Yellow
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 2200 |
Holding Torque (oz.in) | 3115 |
Inductance(mH) | 14 |
Phase Resistance(ohm) | 0.8 |
Rated Current (A) | 6 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 150 |
Frame Size(mm) | 110x110 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | Key-Way |
Shaft Diameter(mm) | 19 |
Shaft Length(mm) | 55.37 |
No. of Lead | 4 |
Lead Length(mm) | 500 |
Weight(g) | 10900 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.