Nema 8 Dual Shaft Stepper Motor 8HS15-0604D 0.6A 4Ncm 6V 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 8 Dual Shaft Stepper Motor 8HS15-0604D 0.6A 4Ncm 6V 4 Wires
This dual shaft nema 8 stepper motors with step angle 1.8deg and size 20x20x38mm. It has 4 wires, each phase draws 0.6A at 6.0V, with holding torque 4Ncm (5.7oz.in). A rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 8HS15-0604D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 4Ncm(5.7oz.in)
- Rated Current/phase: 0.6A
- Voltage: 6V
- Phase Resistance: 10ohms
- Inductance : 5.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 20 x 20mm
- Body Length: 38mm
- Shaft Shape : "O"
- Shaft Diameter: Φ4mm
- Front Shaft Length: 10mm
- Rear Shaft Length : 6mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight : 80g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 4 |
Holding Torque (oz.in) | 5.7 |
Inductance(mH) | 5.5 |
Phase Resistance(ohm) | 10 |
Rated Current (A) | 0.6 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 38 |
Frame Size(mm) | 20x20 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 10 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 80 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.