Mini Nema 8 Steperr Motor 8HS11-0204S 4.8V 1.6Ncm 1.8 deg 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Mini Nema 8 Steperr Motor 8HS11-0204S 4.8V 1.6Ncm 1.8 deg 4 Wires
This mini nema 8 stepper motor is the smallest hybrid motor we carry, it with step angle 1.8deg and size 20x20x28mm. It has 4 wires, each phase draws 0.2A at 4.8V, with holding torque 1.6Ncm (2.3oz.in).
Electrical Specification
- Manufacturer Part Number: 8HS11-0204S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 1.6Ncm(2.3oz.in)
- Rated Current/phase: 0.2A
- Voltage: 4.8V
- Phase Resistance: 24ohms
- Inductance: 8mH ± 20%(1KHz)
Physical Specification
- Frame Size: 20 x 20mm
- Body Length: 28mm
- Shaft Diameter: Φ4mm
- Shaft Length: 10mm
- D-cut Length: 7mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 60g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 1.6 |
Holding Torque (oz.in) | 2.3 |
Inductance(mH) | 8 |
Phase Resistance(ohm) | 24 |
Rated Current (A) | 0.2 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 28 |
Frame Size(mm) | 20x20 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 10 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 50 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.