Nema Size 17 Dual Shaft Stepper Motor 17HM19-0406D 12V 0.9 deg 32Ncm 6 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema Size 17 Dual Shaft Stepper Motor 17HM19-0406D 12V 0.9 deg 32Ncm 6 Wires
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.4A at 12V, with holding torque 32Ncm (45.3oz.in), A rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 17HM19-0406D
- Motor Type: Unipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 32Ncm(45.3oz.in)
- Rated Current/phase: 0.4A
- Voltage: 12V
- Phase Resistance: 30ohms
- Inductance: 38mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 48mm
- Shaft Diameter: Φ5mm
- Front Shaft Length: 24mm
- D-cut Length: 15mm
- Rear Shaft Length: 10mm
- Number of Leads: 6
- Lead Length: 500mm
- Weight: 370g
Connection
A+
|
O+
|
A-
|
B+
|
O-
|
B-
|
RED
|
BLK
|
YEL
|
BLU
|
ORG
|
GRN
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Unipolar |
Holding Torque (Ncm) | 32 |
Holding Torque (oz.in) | 45.3 |
Inductance(mH) | 38 |
Phase Resistance(ohm) | 30 |
Rated Current (A) | 0.4 |
Step Angle(°) | 0.9 |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 6 |
Lead Length(mm) | 500 |
Weight(g) | 350 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.