2Pcs Φ35 Gear Stepper Motor with Planetary Gearbox GMP36-35BY 7.5deg 12VDC 8kg.cm Shaft Diameter 8mm
- Manuals and Documentation:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Application:
Three-dimensional printers, Platforms for CNC cameras,Robotics, Process Automation.
Reduction ratio:4/14/19/27/51/71/100/139/189/264/369/516/720
1 stages: 4:1
2 stages: 14:1 / 19:1 / 27:1
3 stages: 51:1 / 71:1 / 100:1 / 139:1
4 stages: 189:1 / 264:1 / 369:1 / 516:1 / 720:1
Electrical Specification:
Part Number:GMP36-35BY
Rated Voltage:12VDC
No.of Phase:4
Step angle:7.5°
Resistance:60Ω
Rated Torque:30.0Kg.cm
Max momentary tolerance torque: 60.0kg.cm
Rated current:200mA
Detent torque:60g.cm
Holding torque:130g.cm
Output power:6.6~88W
Pull in rate:350pps
Gear type:Plantary Gearbox
Motor type:Stepper Motor
Efficiency: 70%
Noise:30cm.40-50DB
Physical Specification:
Motor Size:Φ35*22.5mm
Motor Diameter:35mm
Length:22.5mm+Planetary gearbox
Gearbox Diameter:36mm
Gearbox Length:26mm (1 stages) / 33.5mm (2 stages) / 40.5mm (3 stages) / 47.5mm (4 stages)
D-cut Length: 15mm
D-cut Diameter:7mm
Shaft Length:18mm
Shaft Diameter:8mm
Weight:320g
Number of leads:6
Physical Specification | |
---|---|
Frame Size(mm) | 36 |
Shaft Diameter(mm) | 8 |
Shaft Length(mm) | 20 |
Weight(g) | 320 |
Gear Ratio | 4::1 / 14:1 / 51:1 / 71:1 / 100:1 / 139:1 / 189:1 / 264:1 / 369:1 / 516:1 / 720:1 |
Body Length(mm) | 22.5mm+gearbox |
No. of Lead | 6 |
Shaft Type | D-Cut |
Single Shaft/Dual Shaft | Single Shaft |
Gearbox Type | Planetary Gearbox |
Electrical Specification | |
No. of Phase | 4 |
Rated Voltage(V) | 12 |
Rated Torque(kg.cm) | 30 |
Phase Resistance(ohm) | 60 |
Rated Current (A) | 0.2 |
Motor Type | 25 |
Rated Power(W) | 6.6~88 |
Holding Torque w/o Gearbox(N.m) | 0.013 |
Step Angle(°) | 7.5° |