• Login
  • Register
  • Working Time: 10:00 - 19:00(Excluding Saturdays and Sundays)
  • Skysmotor.co.uk@gmail.com

Motors & Drivers

iHSV60-30-40-48 Integrated AC Servo Driving Motor is integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in low cost, full closed loop, all digital, low heat, small vibration, and high response, as well as includes thre
Buy It Now: £140.68
iHSV57-30-18-36-21-38-SC Integrated AC Servo Driving Motor is integrated AC servo drive into servo motor, adopts vector control in DSP chip, features in low cost, full closed loop, all digital, low heat, small vibration, and high response, as well as incl
Buy It Now: £151.86
This is a 2-phase bipolar stepper motor with a 1.8° step angle and 59Ncm holding torque. It features a 2A phase current and operates within a voltage range of 12-36V. With a Nema 17 (42mm x 42mm) frame size, 5mm diameter shaft, and D-cut design, this moto
Buy It Now: £8.89
Nema 23 Integrated Closed Loop Stepper Motor ESS23-20 2.2Nm 24-50VDC 1000CPR: Holding Torque: 2.2Nm(311.60oz.in), Input Voltage: 24 - 50VDC, Output Peak Current: 1.8 - 4.0A, Logic Input Current:10mA, Logic Input Voltage:5V, Frame Size: 57 x 57mm, Body Len
Buy It Now: £101.59
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 1.68A, with holding torque 36Ncm (51oz.in).
Buy It Now: £10.40
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 10:1 gear ratio. It's a good solution to applications that with special space but need low speed and/or high torque.
Buy It Now: £42.86
AR3 Open Source Robot Stepper Motors Package Kit, This kit only has motors in AR3 as the below.
Buy It Now: £305.26
Difference between AR3 and AR2 is that each motor in AR3 have rear shaft and mounting holes for encoder.
Buy It Now: £504.66
AR2 Open Source Robot Package Kit with Stepper Motor, Driver, Power Supply and Bracket
Buy It Now: £477.17
Variable Frequency Drive (VFD) V70-7.5T4 Spindle Motor Inverter 7.5KW 10HP 17.5A 380V: Input Voltage: 380 V (Three-phase), Capacity of driver: 14 KVA, Applicable motor: 7.5KW, Control mode: V/F, Vector control, Communication control: RS-485
Buy It Now: £232.15
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now: £86.43
DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applicat
Buy It Now: £68.18