Motors & Drivers
DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applicat
Buy It Now:
£68.18
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£119.28
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£85.22
The CL42T can power 2-phase NEMA11, 14 and 17 stepper motors with incremental encoders(Encoder resolution must be 1000-line). Compared with traditional open loop stepper systems, a CL42T adopted closed loop step system can eliminate potential loss of step
Buy It Now:
£51.16
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 6Ncm (8.5oz.in).
Buy It Now:
£12.37
Nema 11 Dual Shaft Geared Stepper Motor with 14:1 Planetary Gearbox (9.5mm Rear Shaft Length): Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque without Gearbox: 0.14 Ncm(19.88 oz.in), Rated Current/phase: 0.67 A, Phase Resistance: 12 ohms.
Buy It Now:
£34.31
This document describes the basic functionality and the electrical specifications of Skysmotor's 5 Axis CNC Breakout Board Interface ST-V2.
Buy It Now:
£10.36
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£38.38
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£9.64
1 x Closed Loop Stepper Driver 0~6.2A 24~60VDC OK2D57ECS for Nema 23, Nema 24 Stepper Motor + 1 x E Series Nema 23 Closed Loop Stepper Motor 2.0 Nm/283.28oz.in Encoder 1000CPR + 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver +
Buy It Now:
£117.67
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm (1841oz.in).
Buy It Now:
£81.65
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in).
Buy It Now:
£23.38
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 1.0A, with holding torque 1.35Nm (191.2oz.in).
Buy It Now:
£23.38
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 40Ncm (56.6oz.in).
Buy It Now:
£10.40
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 1.2.0A, with holding torque up to 65Ncm (92oz.in).
Buy It Now:
£14.85
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 0.64A, with holding torque 60Ncm (85oz.in).
Buy It Now:
£14.85