Motors & Drivers
Variable Frequency Drive (VFD) V70-7.5T4 Spindle Motor Inverter 7.5KW 10HP 17.5A 380V: Input Voltage: 380 V (Three-phase), Capacity of driver: 14 KVA, Applicable motor: 7.5KW, Control mode: V/F, Vector control, Communication control: RS-485
Buy It Now:
£232.15
This is a dual-shaft motor with a 15mm long rear shaft, and the shaft diameter is 12mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now:
£86.43
DMRS Series are stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. They built-in PR feature with 16-segment position table (PR Mode) can save additional controllers in most of point-to-point applicat
Buy It Now:
£68.18
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£119.28
CLRS Series are closed loop stepper driver based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes, built-in PR feature with 16-segment position table(PR Mode). They can not only solve the problem of step loss in the ope
Buy It Now:
£85.22
The CL42T can power 2-phase NEMA11, 14 and 17 stepper motors with incremental encoders(Encoder resolution must be 1000-line). Compared with traditional open loop stepper systems, a CL42T adopted closed loop step system can eliminate potential loss of step
Buy It Now:
£51.16
This mini nema 11 bipolar stepper motor with step angle 1.8deg and size 28x28x31mm. It has 4 wires, each phase draws 0.67A at 3.8V, with holding torque 6Ncm (8.5oz.in).
Buy It Now:
£12.37
Nema 11 Dual Shaft Geared Stepper Motor with 14:1 Planetary Gearbox (9.5mm Rear Shaft Length): Motor Type: Bipolar Stepper, Step Angle: 1.8 deg, Holding Torque without Gearbox: 0.14 Ncm(19.88 oz.in), Rated Current/phase: 0.67 A, Phase Resistance: 12 ohms.
Buy It Now:
£34.31
This document describes the basic functionality and the electrical specifications of Skysmotor's 5 Axis CNC Breakout Board Interface ST-V2.
Buy It Now:
£10.36
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£38.38
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£9.64
1 x Closed Loop Stepper Driver 0~6.2A 24~60VDC OK2D57ECS for Nema 23, Nema 24 Stepper Motor + 1 x E Series Nema 23 Closed Loop Stepper Motor 2.0 Nm/283.28oz.in Encoder 1000CPR + 1 x 1.7 m(67") Long Encoder Extension Cable for Closed Loop Stepper Driver +
Buy It Now:
£117.67
This is the strongest Nema 34 cnc stepper motor, it with size 86x86x150mm. It has 4 wires, each phase draws 5.0A, with holding torque 13Nm (1841oz.in).
Buy It Now:
£81.65
This is one of the most popular Nema 23 stepper motor, it with step angle 1.8deg and size 57x57x76mm. It has 4 wires, each phase draws 2.8A, with holding torque 1.9Nm (269oz.in).
Buy It Now:
£23.38
This unipolar Nema 23 stepper motor with step angle 1.8deg and size 57x57x76mm. It has 6 wires, each phase draws 1.0A, with holding torque 1.35Nm (191.2oz.in).
Buy It Now:
£23.38
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.4A at 12V, with holding torque 40Ncm (56.6oz.in).
Buy It Now:
£10.40