Nema 14 Closed-loop Stepper Gearmotor 3 Phase L=52mm Gear Raio 14:1 Encoder 300CPR
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 14 Closed-loop Stepper Gearmotor 3 Phase L=52mm Gear Raio 14:1 Encoder 300CPR
Motor Specification
- Manufacturer Part Number: 14HS20-1504S-PG14-E300
- Motor Type: Bipolar Stepper
- Frame Size: 35 x 35mm
- Motor Length: 52mm
- Step Angle without Gearbox: 1.8 deg
- Holding Torque without Gearbox: 0.4Nm(56.6oz.in)
- Rated Current/phase: 1.5A
- Phase Resistance: 2.8ohms
- Voltage: 4.2V
- Inductance: 3.8mH ± 20%(1KHz)
- Number of Leads: 4
- Lead Length: 400mm
Gearbox Specifications
- Gearbox Type: Planetary
- Gearbox Length: 36.8mm
- Gear Ratio: 13.73
- Efficiency: 80%
- Shaft Diameter: Φ6mm
- Shaft Length: 18mm
- D-Cut length: 12mm
- Backlash at No-load: <=1deg
- Max.Permissible Torque: 4Nm(566.4.oz.in)
- Moment Permissible Torque: 8Nm(1132.9oz.in)
- Shaft Maximum Axial Load: 50N
- Shaft Maximum Radial Load: 100N
Encoder Specification
- Driving Voltage : 5V
- Output current : 50mA
- Resolution : 300ppr
- Output Signal : 2 Channels
- Bore Diameter : Φ4mm
- Output Frequency : ≤1MHz
- Running Speed : ≤5000rpm
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Motor Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Body Length(mm) | 52 |
Holding Torque w/o Gearbox(Ncm) | 40 |
Holding Torque w/o Gearbox(oz.in) | 56.6 |
Inductance(mH) | 3.8 |
Lead Length(mm) | 400 |
Motor Nema Size | Nema 14 |
No. of Lead | 4 |
Phase Resistance(ohm) | 2.8 |
Rated Current (A) | 1.5 |
Shaft Diameter(mm) | 6 |
Shaft Length(mm) | 18 |
Step Angle(°) | 1.8 |
Encoder Specification | |
IP Protection | IP20 |
Output Current(mA) | 50 |
Output Frequency | ≤0.03MHz |
Rated Voltage(V) | 5V |
Resolution(CPR) | 300 |
Running Speed(rpm) | ≤5000rpm |
Output Signal Channels | 2 Channels |
Physical Specification | |
Weight(g) | 450 |