Nema 14 Hollow Shaft Stepper Motor 14HS19-2004H 33Ncm 2.0A 4Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 14 Hollow Shaft Stepper Motor 14HS19-2004H 33Ncm 2.0A 4Wires
Electrical Specification
- Manufacturer Part Number: 14HS19-2004H
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.33 Nm(46.74oz.in)
- Rated Current/phase: 2.0 A
- Phase Resistance: 1.4 ohms± 10%
- Inductance: 2.41 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 35 x 35 mm
- Body Length: 48 mm
- Outer Shaft Diameter: Φ8 mm
- Inner Shaft Diameter: Φ4 mm
- Front Shaft Length: 16 mm
- Rear Shaft Length: 9 mm
- Number of Leads: 4
- Lead Length: 310 mm
- Weight: 0.22 kg
Connection
A+
|
A-
|
B+
|
B-
|
RED
|
RED/WHI
|
GRN/WHI
|
GRN
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 33 |
Holding Torque (oz.in) | 46.74 |
Inductance(mH) | 2.41 |
Phase Resistance(ohm) | 1.4 |
Rated Current (A) | 2 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | 35 x 35 |
Lead Length(mm) | 310 |
No. of Lead | 4 |
Shaft Type | Hollow |
Single Shaft/Dual Shaft | Dual Shaft |
Weight(g) | 220 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.