Nema 11 Stepper Motor OK28DL33B-Q60-ZC 1.8 deg 6.8Ncm 28 x 28mm for Yamaha IC Burning Machine / Labeling Machine
This is a bipolar 2-phase stepper motor with a 1.8° step angle and a static moment of 6.8Ncm (9.62 oz.in). It operates with a rated current of 1A per phase and a phase voltage of 2.1V. The motor features a frame size of 28x28mm and a body length of 33mm. It includes a front shaft diameter of 8mm, a front shaft length of 60mm, and a rear shaft length of 13mm. The motor also features a connecting rod with an outside diameter of 4mm and an inside diameter of 2mm. Equipped with four leads, each with a lead length of 500mm.
Electrical Specification:
Manufacturer Part Number:OK20HC38-22NK1
Motor Type: Bipolar Stepper
Number of Phase:2
Step Angle: 1.8 deg
Static Moment: 6.8Ncm(9.62soz.in)
Phase Voltage:2.1V
Rated Current/phase: 1A
Phase Resistance: 2.1ohms± 10%
Inductance: 1.5 mH ± 20%(1KHz);
Physical Specification:
Frame Size: 28 x 28 mm
Body Length: 33 mm
Front Shaft Diameter: Φ8mm
Front Shaft Length:60 mm
Rear Shaft Length:13 mm
Outside Diameter of Connecting Rod:4mm
Inside Diameter of Connecting Rod:2mm
Number of Leads: 4
Lead Length: 500 mm
Weight: 110g;
Electrical Specification | |
---|---|
Open-loop/Closed-loop | Open-loop |
No. of Phase | 2 |
Holding Torque (oz.in) | 9.62 |
Holding Torque (Ncm) | 6.8 |
Bipolar/Unipolar | Bipolar |
Inductance(mH) | 2.1 |
Phase Resistance(ohm) | 1.5 |
Rated Current (A) | 1 |
Step Angle(°) | 1.8 |
Phase Current(A) | 1 |
Phase Voltage(V) | 2.1 |
Static Moment | 6.8Ncm |
Physical Specification | |
Single Shaft/Dual Shaft | Dual Shaft |
Frame Size(mm) | 28 x 28 |
Lead Length(mm) | 500 |
Shaft Type | Hollow |
Weight(g) | 110 |
Body Length(mm) | 33 |