Oukeda Hollow Shaft NEMA8 Stepper Motor SMCU002939 1.8 Deg 1.8Ncm for Placement Machine
This is a 2-phase stepper motor with a 1.8° step angle and a rated torque of 1.8Ncm (2.55 oz.in). It operates with a rated voltage of 3.9VDC and a rated current of 0.6A. The motor features a frame size of 20x20mm and a body length of 30mm. The shaft has an outer diameter of 5mm and an inner diameter of 2.5mm, with a front shaft length of 12mm and a rear shaft length of 5mm. It is equipped with four leads, each with a lead length of 300mm.
Electrical Specification:
Manufacturer Part Number:OK20HC30-NK2.5-HM5
Number of Phase:2
Step Angle: 1.8 deg
Rated Voltage:3.9VDC
Rated Current:0.6A
Rated Torque:1.8Ncm(2.55oz.in)
Phase Resistance: 6.5 ohms± 10%
Inductance: 1.7mH ± 20%(1KHz)
Physical Specification:
Frame Size: 20x 20 mm
Body Length:30mm
Outer Shaft Diameter: Φ5 mm
Inner Shaft Diameter: Φ2.5 mm
Front Shaft Length: 12 mm
Rear Shaft Length: 5 mm
Number of Leads: 4
Lead Length: 300 mm
Weight:60g;
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 1.8 |
Holding Torque (oz.in) | 2.55 |
Rated Current (A) | 0.6 |
No. of Phase | 2 |
Rated Voltage(V) | 3.9 |
Inductance(mH) | 1.7 |
Phase Resistance(ohm) | 6.5 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 30 |
No. of Lead | 4 |
Single Shaft/Dual Shaft | Dual Shaft |
Frame Size(mm) | 20 x 20 |
Shaft Type | Hollow |
Lead Length(mm) | 300 |