Nema 16 Stepper Motor 16HS13-0654S 4.55V 1.8 deg 18Ncm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 16 Stepper Motor 16HS13-0654S 4.55V 1.8 deg 18Ncm 4 Wires
This bipolar Nema 16 stepper motor with step angle 1.8deg and size 39x39x34mm. It has 4 wires, each phase draws 0.65A at 4.55V, with holding torque 18Ncm (25.5oz.in).
Electrical Specification
- Manufacturer Part Number: 16HS13-0654S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 18Ncm(25.5oz.in)
- Rated Current/phase: 0.65A
- Voltage: 4.55V
- Phase Resistance: 7ohms
- Inductance: 9.3mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Shaft Length: 22mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 190g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 18 |
Holding Torque (oz.in) | 25.5 |
Inductance(mH) | 9.3 |
Phase Resistance(ohm) | 7 |
Rated Current (A) | 0.65 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 34 |
Frame Size(mm) | 39x39 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 22 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 180 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.