Nema 16 Stepper Motor 16HM10-0604S 6V 0.9 deg 16Ncm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 16 Stepper Motor 16HM10-0604S 6V 0.9 deg 16Ncm 4 Wires
This bipolar Nema 16 stepper motor with step angle 0.9deg and size 39x39x25mm. It has 4 wires, each phase draws 0.6A at 6V, with holding torque 16Ncm (22.7oz.in).
Electrical Specification
- Manufacturer Part Number: 16HM10-0604S
- Motor Type: Bipolar Stepper
- Step Angle: 0.9 deg
- Holding Torque: 16Ncm(22.7oz.in)
- Rated Current/phase: 0.6A
- Voltage: 6V
- Phase Resistance: 10ohms
- Inductance: 15.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 39 x 39mm
- Body Length: 25mm
- Shaft Diameter: Φ5mm
- Shaft Length: 24mm
- D-cut Length: 15mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 150g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Red
|
Green
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 16 |
Holding Torque (oz.in) | 22.7 |
Inductance(mH) | 15.5 |
Phase Resistance(ohm) | 10 |
Rated Current (A) | 0.6 |
Step Angle(°) | 0.9 |
Physical Specification | |
Body Length(mm) | 25 |
Frame Size(mm) | 39x39 |
Single Shaft/Dual Shaft | Single Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 120 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.