Nema 17 Dual Shaft Stepper Motor 17HS13-1334D 2.8V 1.8 deg 22Ncm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 17 Dual Shaft Stepper Motor 17HS13-1334D 2.8V 1.8 deg 22Ncm 4 Wires
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm (31oz.in). A rear shaft is available.
Electrical Specification
- Manufacturer Part Number: 17HS13-1334D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 22Ncm(31oz.in)
- Rated Current/phase: 1.33A
- Voltage: 2.8V
- Phase Resistance: 2.1ohms
- Inductance: 2.5mH ± 20%(1KHz)
Physical Specification
- Frame Size: 42 x 42mm
- Body Length: 34mm
- Shaft Diameter: Φ5mm
- Shaft Length: 20mm
- Rear Shaft Length: 10mm
- Number of Leads: 4
- Lead Length: 300mm
- Weight: 230g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 22 |
Holding Torque (oz.in) | 31 |
Inductance(mH) | 2.5 |
Phase Resistance(ohm) | 2.1 |
Rated Current (A) | 1.33 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 34 |
Frame Size(mm) | 42x42 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | O |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 20 |
No. of Lead | 4 |
Lead Length(mm) | 300 |
Weight(g) | 220 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.