Nema 17 Dual Shaft Stepper Motor 17HS19-2004D 59Ncm 4 Wires 2A 2.8v
-
Manuals and Documentation:
Full Datasheet:
Torque Curve:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 17 Dual Shaft Stepper Motor 17HS19-2004D 59Ncm 4 Wires 2A 2.8v
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm (83.78oz.in).
Electrical Specification
Manufacturer Part Number: 17HS19-2004D
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 59Ncm(83.78oz.in)
Rated Current/phase: 2.00A
Phase Resistance: 1.40ohms
Inductance: 3.00mH ± 20%(1KHz)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 48mm
Shaft Diameter: Φ5mm
Front Shaft Length: 24mm
Rear Shaft Length: 13mm
Number of Leads: 4
Lead Length: 500mm
Weight: 400g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 59 |
Holding Torque (oz.in) | 83.57 |
Inductance(mH) | 3.00 |
Phase Resistance(ohm) | 1.40 |
Rated Current (A) | 2.00 |
Step Angle(deg.) | 1.8 |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | Nema 17 (42 x 42) |
No. of Lead | 4 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 25 |
Single Shaft/Dual Shaft | Dual Shaft |
Weight(g) | 400 |
Output Shaft Type | O |
IP Rating | 40 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox