Nema 17 Full D-cut Shaft Stepper Motor 17HS19-2004S2 59Ncm 4 Wires with 1m Cable & Connector
-
Manuals and Documentation:
Full Datasheet:
Torque Curve:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 17 Full D-cut Shaft Stepper Motor 17HS19-2004S2 59Ncm 4 Wires with 1m Cable & Connector
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the end of cable. It's good ideal for 3D printers, as well as CNC and robotics applications.
Electrical Specification
Manufacturer Part Number: 17HS19-2004S2
Motor Type: Bipolar Stepper
Step Angle: 1.8 deg
Holding Torque: 59Ncm(84oz.in)
Rated Current/phase: 2.0A
Phase Resistance: 1.4ohms
Inductance: 3.0mH ± 20%(1KHz)
Physical Specification
Frame Size: 42 x 42mm
Body Length: 47mm
Shaft Diameter: Φ5mm
Shaft Length: 24mm
D-cut Length: 24mm
Number of Leads: 4
Lead Length: 1000mm
Weight: 390g
Connection
A+ | A- | B+ | B- |
Black | Green | Red | Blue |
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 59 |
Holding Torque (oz.in) | 84 |
Inductance(mH) | 3 |
Phase Resistance(ohm) | 1.4 |
Rated Current (A) | 2 |
Step Angle(deg.) | 1.8 |
Physical Specification | |
Body Length(mm) | 48 |
Frame Size(mm) | Nema 17 (42 x 42) |
Lead Length(mm) | 1000 |
No. of Lead | 4 |
Shaft Diameter(mm) | 5 |
Shaft Length(mm) | 24 |
Single Shaft/Dual Shaft | Single Shaft |
Weight(g) | 400 |
Output Shaft Type | D-Cut |
IP Rating | 40 |
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox
- Motor Shaft
- Cable
- Connector
- Encoder
- Brake
- Gearbox