Nema 24 Round Pancake Stepper Motor 24HR04-1004S 1.8deg 6Ncm 1A Φ60x9.6mm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 24 Round Pancake Stepper Motor 24HR04-1004S 1.8deg 6Ncm 1A Φ60x9.6mm 4 Wires
This bipolar pancake Nema 24 stepper motor with step angle 1.8deg and size Φ60x9.6 mm. It has 4 wires, each phase draws 1 A, with holding torque 6 Ncm (8.498 oz.in).
Electrical Specification
- Manufacturer Part Number: 24HR04-1004S
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 6 Ncm(8.498 oz.in)
- Rated Current/phase: 1 A
- Phase Resistance: 3.6 ohms
- Inductance: 1.8 mH ± 20%(1KHz)
Physical Specification
- Frame Size: Φ60 mm
- Body Length: 9.6 mm
- Shaft Diameter: Φ4 mm
- Shaft Length: 10 mm
- Number of Leads: 4
- Lead Length: 300 mm
- Weight: 79.6 g
Connection
A+
|
A-
|
B+
|
B-
|
Red
|
Blue
|
Orange
|
Yellow
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 6 |
Holding Torque (oz.in) | 8.498 |
Inductance(mH) | 1.8 |
Phase Resistance(ohm) | 3.6 |
Rated Current (A) | 1 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 9.6 |
Frame Size(mm) | Φ60 |
Lead Length(mm) | 300 |
No. of Lead | 4 |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 10 |
Shaft Type | O |
Single Shaft/Dual Shaft | Single Shaft |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.