Nema 24 Stepper Motor 24HP39-5004S 1.8deg 3.5 Nm 5.0A 4 Wires
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till January 6th,2025
Nema 24 Stepper Motor 24HP39-5004S 1.8deg 3.5 Nm 5.0A 4 Wires
Electrical Specification
- Manufacturer Part Number: 24HP39-5004S
- Number Of Phase: 2
- Step Angle: 1.8 deg
- Holding Torque: 3.5 Nm(495.74oz.in)
- Rated Current/phase: 5.0 A
- Phase Resistance: 0.48 ohms± 10%
- Inductance: 1.85 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 60 x 60 mm
- Body Length: 97.8 mm
- Shaft Diameter: Φ10 mm
- Shaft Length: 21 mm
- Keyway Shaft Length: 15 mm
- Number of Leads: 4
- Lead Length: 500 mm
- Weight: 1.6 kg
Connection
A+
|
A-
|
B+
|
B-
|
BLK
|
GRN
|
RED
|
BLU
|
Electrical Specification | |
---|---|
Holding Torque (Ncm) | 350 |
Holding Torque (oz.in) | 495.74 |
Inductance(mH) | 1.85 |
Phase Resistance(ohm) | 0.48 |
Rated Current (A) | 5.0 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 97.8 |
Frame Size(mm) | 60 x 60 |
Lead Length(mm) | 500 |
No. of Lead | 4 |
Shaft Diameter(mm) | 10 |
Shaft Length(mm) | 21 |
Shaft Type | Keyway |
Single Shaft/Dual Shaft | Single Shaft |
Weight(g) | 1600 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.