Nema 24 Dual Shaft Stepper Motor 24HS34-3504D 3.85V 3.1Nm 4 Wires
-
Manuals and Documentation:
Full Datasheet:
Torque Curver:
Nema 24 Dual Shaft Stepper Motor 24HS34-3504D 3.85V 3.1Nm 4 Wires
This bipolar Nema 24 stepper motor with step angle 1.8deg and size 60x60x88mm. It has 4 wires, each phase draws 3.5A, with holding torque 3.1Nm (439oz.in). A rear shaft was made for encoder or equals.
Electrical Specification
- Manufacturer Part Number: 24HS34-3504D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 3.1Nm(439oz.in)
- Rated Current/phase: 3.5A
- Voltage: 3.85V
- Phase Resistance: 1.1ohms
- Inductance: 5.6mH ± 20%(1KHz)
Physical Specification
- Frame Size: 60 x 60mm
- Body Length: 88mm
- Shaft Diameter: Φ8mm
- Front Shaft Length: 24mm
- Rear Shaft Length: 15mm
- D-cut Length: 20mm
- Number of Leads: 4
- Lead Length: 600mm
- Weight: 1.34kg
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 310 |
Holding Torque (oz.in) | 439 |
Inductance(mH) | 5.6 |
Phase Resistance(ohm) | 1.1 |
Rated Current (A) | 3.5 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 88 |
Frame Size(mm) | 60x60 |
Single Shaft/Dual Shaft | Dual Shaft |
Shaft Type | D-Cut |
Shaft Diameter(mm) | 8 |
Shaft Length(mm) | 24 |
No. of Lead | 4 |
Lead Length(mm) | 600 |
Weight(g) | 1340 |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.