Nema 6 Daul Shaft Stepper Motor 6HS12-0304D 1.8deg 0.58Ncm 0.3A 14x14x30mm 4 Wires
- Manuals and Documentation: Full Datasheet:
- 6% Off On Total Order Amount!
- Enjoy Discount at Checkout! No Need Coupon Code!
- Valid Till December 3th,2024
Nema 6 Daul Shaft Stepper Motor 6HS12-0304D 1.8deg 0.58Ncm 0.3A 14x14x30mm 4 Wires
Electrical Specification
- Manufacturer Part Number: 6HS12-0304D
- Motor Type: Bipolar Stepper
- Step Angle: 1.8 deg
- Holding Torque: 0.58 Ncm(0.82oz.in)
- Rated Current/phase: 0.3 A
- Phase Resistance: 22 ohms
- Inductance: 3.4 mH ± 20%(1KHz)
Physical Specification
- Frame Size: 14 x 14 mm
- Body Length: 30 mm
- Shaft Diameter: Φ4 mm
- Front Shaft Length: 15 mm
- D-cut Shaft Length: 10 mm
- Rear Shaft Length: 15 mm
- Number of Leads: 4
- Lead Length: 300 mm
- Weight: 30 g
Connection
A+
|
A-
|
B+
|
B-
|
Black
|
Green
|
Red
|
Blue
|
Electrical Specification | |
---|---|
Bipolar/Unipolar | Bipolar |
Holding Torque (Ncm) | 0.58 |
Holding Torque (oz.in) | 0.82 |
Inductance(mH) | 3.4 |
Phase Resistance(ohm) | 22 |
Rated Current (A) | 0.3 |
Step Angle(°) | 1.8 |
Physical Specification | |
Body Length(mm) | 30 |
Frame Size(mm) | 14 x 14 |
Lead Length(mm) | 300 |
No. of Lead | 4 |
Shaft Diameter(mm) | 4 |
Shaft Length(mm) | 15 |
Shaft Type | D-Cut |
Single Shaft/Dual Shaft | Dual Shaft |
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.
- Connectors: Molex, Harwin, Tyco/AMP, JST etc.
- Lead wires & cables: Special lengths, Protective hose
- Shaft: Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow
- Winding: Resistance, Inductance, Rated Current, etc.