Open Loop Stepper Motor
This is a dual-shaft motor with a 13.5mm long rear shaft, and the shaft diameter is 8mm. Threaded holes are available on the rear end cap which can be used to brakes, encoder for hand wheels.
Buy It Now:
£20.21
2 x Nema 17 Bipolar 0.9deg 46Ncm (65.1oz.in) 2A 2.8V 42x42x48mm 4 Wires (17HM19-2004S1) + 2 x Nema 17 Bipolar 59Ncm (84oz.in) 2A 42x48mm 4 Wires w/ 1m Cable & Connector (17HS19-2004S2) + 1 x Nema 17 Bipolar 45Ncm (64oz.in) 2A 42x42x40mm 4 Wires w/ 1m Cabl
Buy It Now:
£52.08
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws current 0.85A at 5.3V, with holding torque 44Ncm (62.3oz.in).
Buy It Now:
£11.87
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x48mm. It has 6 wires, each phase draws 0.4A at 12V, with holding torque 32Ncm (45.3oz.in).
Buy It Now:
£11.87
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x40mm. It has 4 wires, each phase draws very lower current 0.28A, with holding torque 36Ncm (51oz.in).
Buy It Now:
£10.40
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 4 wires, each phase draws current 0.85A at 5.4V, with holding torque 36Ncm (51oz.in).
Buy It Now:
£10.40
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x39mm. It has 6 wires, each phase draws 0.4A at 12V, with holding torque 26Ncm (37oz.in).
Buy It Now:
£10.40
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.95A, with holding torque 16Ncm (22.7oz.in).
Buy It Now:
£9.64
This unipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x33mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 15.8Ncm (22.4oz.in).
Buy It Now:
£9.64
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x39mm. It has 6 wires, each phase draws current 0.8A at 6V, with holding torque 26Ncm (36.8oz.in).
Buy It Now:
£12.79
This unipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x34mm. It has 6 wires, each phase draws current 0.31.0A at 12V, with holding torque 16Ncm (22.7oz.in).
Buy It Now:
£12.37
This short shaft Nema 17 stepper motor with 9.5mm length shaft, motor size is 42x42x39mm. It has 4 wires, each phase draws current 1.58A, with holding torque 36Ncm (51oz.in). It is designed for PLM series Planetary Gearbox.
Buy It Now:
£7.04
This is an updated version nema 17 stepper motor with holding torque of 59Ncm(83.6oz.in) and a full d-cut shaft. Based on old verstion, we have lengthened motor cable length to 1 metre, and add a 4-pin 0.1" pitch (2.54mm) Harwin female connector at the en
Buy It Now:
£11.10
This bipolar Nema 17 stepper motor with step angle 0.9deg and size 42x42x48mm. It has 4 wires, each phase draws current 2.0A, with holding torque 46Ncm (65.1oz.in).
Buy It Now:
£12.05
This model is dual shaft Nema 17 Bipolar stepper motor,it with step angle 1.8deg and size 42x42x48mm. It has 4 wires, each phase draws 2A at 2.8V, with holding torque 59Ncm (83.78oz.in).
Buy It Now:
£10.17
This bipolar Nema 17 stepper motor with step angle 1.8deg and size 42x42x34mm. It has 4 wires, each phase draws current 1.33A, with holding torque 22Ncm (31oz.in). A rear shaft is available.
Buy It Now:
£9.64