OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver
- Manuals and Documentation: Driver Manual:
OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver
This is a 2-phase bipolar closed-loop stepper motor kit, including the OK57DL76EC1-2C1 motor and OK2D60BH driver. The motor has a 1.8° step angle and 2.0 Nm holding torque, with a phase current of 2.8A. It is compatible with a voltage range of 20-48VDC. With a Nema 23 (57mm x 57mm) frame size and 8mm diameter shaft, this kit is for a wide range of industrial and automation applications.
Electrical Specification
Manufacturer Part Number: OK57DL76EC1-2C1
Number of phase: 2
Step Angle: 1.8 deg
Holding Torque: 2.0 Nm(283.22oz.in)
Phase Current: 2.8 A
Phase Voltage:2.0DVC
Related Voltage:20-48VDC
Phase Resistance: 1.13 ohms± 10%
Inductance: 3.6 mH ± 20%(1KHz)
Physical Specification
Frame Size: 57 x 57 mm
Body Length: 76 mm
Shaft Diameter: Φ8 mm
Shaft Length: 21 mm
D-Cut Shaft Length: 15 mm
Lead Length: 300 mm
Weight: 1.6 kg;
.jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(1).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
Closed Loop Stepper Driver 0~5.6A 16~70VDC for Nema 23, Nema 24 Stepper Motor
Key Features:
Closed-loop, eliminates loss of synchronization
Broader operating range - higher torque and higher speed
Reduced motor heating and more efficient
Do not need a high torque margin
No Tuning and always stable
Quick response, no delay and almost no settle time
High torque at starting and low speed, high stiffness at standstill
Offer servo-like performance at a much lower cost;
Performance parameters:
Adopting new 32-bit motor control dedicated dual-core DSP chip;
Adopting advanced vector current and speed and position closed-loop control algorithms;
The static current and dynamic current ratio can be automatically set;
The motor comes with a 1000-line high-precision encoder;
Optocoupler isolated differential signal input;
The impulse response frequency can reach up to 300KHZ;
Subdivided into 16 settings (800-51200) to meet the requirements of most customers;
It has several protection functions such as overcurrent, overvoltage, overspeed, overheating, and excessive tracking error.
Specifications:
Model:OK2D60BH
Output Peak Current: 0~5.6A
Input Voltage: +16~70VDC (Typical 36VDC)
Logic Signal Current: 7~16mA (Typical 10mA)
Pulse Input Frequency: 0~200kHz
Encoder current:50mA
Isolation Resistance: 500MΩ
Weight:280g
Operating Environment and other Specifications(Tj = 25℃/77℉):
Cooling: Natural Cooling or Forced cooling
Environment: Avoid dust, oil fog and corrosive gases
Ambient Temperature: 0℃ － 50℃
Humidity: 40%RH－90%RH
Operating Temperature: 70℃ MAX
Vibration: 5.9m/s2 Max
Storage Temperature: -20℃ －+80℃;
.jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
.jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
(2).jpg "OUKEDA Nema 23 Closed Loop Stepper Motor Kit OK57DL76EC1-2C1+OK2D60BH 2.0 Nm 1.8 Deg With OK2D60BH Driver")
Install Size Picture:
| CNC Kit Specification | |
|---|---|
| No of Axis | Single Axis |
| Open-loop/Closed-loop | Closed-loop |
| Motor Specification | |
| Body Length(mm) | 98.56 |
| Holding Torque (Ncm) | 200 |
| Holding Torque (oz.in) | 283.22 |
| Inductance(mH) | 3.6 |
| Lead Length(mm) | 300 |
| Motor Length(mm) | 76 |
| Motor Nema Size | NEMA 23 |
| Phase Resistance(ohm) | 1.13 |
| Rated Current (A) | 2.8 |
| Shaft Diameter(mm) | 8 |
| Shaft Length(mm) | 21 |
| Shaft Type | 8 |
| Single Shaft/Dual Shaft | Single Shaft |
| Step Angle(°) | 1.8 |
| Number Of Phase | 2 |
-
- ● お支払いについて
- お支払方法は以下の通りとなっております。
クレジットカード決済
PayPal
- ● 配送について
- 配送時間：ご入金確認後３営業日以内に発送致します。
- 運送会社：EMS、DHL、FedEx、TNTにて商品配送を行っております。
- 送料：送料は届け先、納期、商品の重量と包装サイズによって異なります。ショッピングカートページで、お客様が選んだ運送会社に基づいて、送料は自動的に計算されます。
-
- ※選んだ運送方式は、運送コストと納期に影響を及ぶ可能性があります。ですから、お客様はご自身の需要を考えて、最適な運送方式を選んでください。
- ● 故障が発生する時
- 返品・交換
- 30日返品・交換可能、１年品質保証を提供致します。
故障が発生する場合、直接メール、お電話或いはライブチャットでご連絡ください。
初期不良・商品違いの場合
商品がお手元に届きましたら、すぐにご確認下さい。
万が一初期不良、商品違いの場合は送料当店負担にて
交換、返品を承ります。
-
- ● 個人情報のお取り扱いについて
- デンタルでは、お客様のご住所・電話番号・メールアドレス・その他すべての情報を第三者に流すような事は絶対にございません。
- ● お問い合わせ
- Eメール：[email protected]（24時間受信。）
- ※オンライン営業時間は日曜日を除いて、午前八時半から午後十時までです、弊社のメールでは２４時間オープンしております。日曜日と祝日を除いて十二時間以内に返信致します。オンラインでない場合は、メッセージをお残しください。
- ※ご注文に関するお問い合わせには、必ず「ご注文番号」と「お名前」をご記入の上、メールくださいますようお願いいたします。
